What Is The Procedure To Change Your Wi-Fi Router Settings
A router is a device that takes the information from your internet network to one or more computers. The router will also discover and choose the most excellent method to transmit data consequently so that you attain the information quickly. It is prudent that every person who uses computer should have basic knowledge of the device so that in case you are required to do some changes on the settings, you are able to perform.
Here are some steps that can guide you to change settings on your router:-
Ensure that your computer is connected properly to the router.
The first and the foremost thing to do are to open the router settings page in your browser by typing the IP address. The IP address of the router is sometimes mentioned on the router. If you are not able to locate it, then you can also follow below method to look for your router IP:-
Go to start and type CMD
This will open the command prompt window
On this window, type “ipconfig” (without parenthesis) and press enter
You will get all the information you required to change the settings on the router. The one which says Default Gateway is the address of your router. Note it down and enter the same IP address on your browser.
If your computer is communicating with your router properly, then the moment you press enter after typing IP address, it would ask you for username and password. Usually, the default username and password is admin, but if you have used some other name for your router and the password, type in that information. If you are unable to open the page, there is a possibility that the router address have been fed manually in your network adapter settings. To check:-
Go to Control Panel
Under Network and Sharing centre, you can view “Network Connections”
Right click on the Ethernet adapter and click on properties
On the Ethernet properties window, look for Internet Protocol Version 4 and double click it
On the new window, ensure that “Obtain IP Address Automatically” and “Obtain DNS Server Automatically” is selected.
Close all the windows and try opening the IP address again in the address bar
Once you have entered the information, you will land up on the setup page of your router, which would have different information fields where you can enter information you wish to change. If you are still unable to open the page, try and turn of all the firewalls and antivirus on your system
Alternatively, if you are too jittery about doing such thing on your own, then you can call your ISP and call for a network administrator to visit and make changes or take online tech support help.
Wireless routers get connected to your modem, and it sets up a signal in a particular range. To keep your computer out of unnecessary admission, you should keep your wireless router secured.